Ф 2.4 X6 m ball mill How the ball mill works To improve the ball mill production should start from the technological factors, mechanical factors not only, but also guarantee for effective management and control of ball mill! The main purpose of the management is to prevent the happening of the running condition and eliminate, in spite of implementation of fine operation with low power consumption, consumption to achieve high quality, tower production. Detail operation steps: reasonable index refers to the operation of production targets, indicators to determine the scope of the upper and lower; The correct operating parameters is must control the process; Troubleshooting measures refers to the execution method, fault timely quickly ruled out. Today is fine to expounds the specific operation of this a few steps: 1. Reasonable indicators Rational production index can not only improve the enthusiasm of staff for the enterprise, also is a kind of cost control measures, can through the enterprise internal factors on the performance of the equipment and to determine the indicators with upper and lower limits. 2. The correct operating parameters Operation and control of the ball mill is mainly based on the cyclic load, choose powder efficiency as the goal, these two parameters are reasonable collocation of the wind, such as material, the fineness of three parameters to control the grinding conditions and the fineness of finished product. 3. The failure of elimination Out of failure, how to timely find the cause, and troubleshooting of safe and reliable, is the necessary content of fine operation. The ball mill product parameters

規(guī)格型號	筒體轉(zhuǎn)速（r/min）	裝球量(t)	進(jìn)料粒度(mm)	出料粒度(mm)	產(chǎn)量	電機功率(kw)	重量(t)
					(t/h)
Ф900×1800	36～38	1.5	≤20	0.075-0.89	0.65-2	18.5	4.6
Ф900×3000	36	2.7	≤20	0.075-0.89	1.1-3.5	22	5.6
Ф1200×2400	36	3	≤25	0.075-0.6	1.5-4.8	30	12
Ф1200×3000	36	3.5	≤25	0.074-0.4	1.6-5	37	12.8
Ф1200×4500	32.4	5	≤25	0.074-0.4	1.6-5.8	55	13.8
Ф1500×3000	29.7	7.5	≤25	0.074-0.4	2-5	75	15.6
Ф1500×4500	27	11	≤25	0.074-0.4	3-6	110	21
Ф1500×5700	28	12	≤25	0.074-0.4	3.5-6	130	24.7
Ф1830×3000	25.4	11	≤25	0.074-0.4	4-10	130	28
Ф1830×4500	25.4	15	≤25	0.074-0.4	4.5-12	155	32
Ф1830×6400	24.1	21	≤25	0.074-0.4	6.5-15	210	34
Ф1830×7000	24.1	23	≤25	0.074-0.4	7.5-17	245	36
Ф2100×3000	23.7	15	≤25	0.074-0.4	6.5-36	155	34
Ф2100×4500	23.7	24	≤25	0.074-0.4	8-43	245	42
Ф2100×7000	23.7	26	≤25	0.074-0.4	8-48	280	50
Ф2200×4500	21.5	27	≤25	0.074-0.4	9-45	280	48.5
Ф2200×6500	21.7	35	≤25	0.074-0.4	14-26	380	52.8
Ф2200×7000	21.7	35	≤25	0.074-0.4	15-28	380	54
Ф2200×7500	21.7	35	≤25	0.074-0.4	15-30	380	56
Ф2400×3000	21	23	≤25	0.074-0.4	7-50	245	54
Ф2400×4500	21	30	≤25	0.074-0.4	8.5-60	320	65
Ф2700×4000	20.7	40	≤25	0.074-0.4	12-80	400	94
Ф2700×4500	20.7	48	≤25	0.074-0.4	12-90	430	102
Ф3200×4500	18	65	≤25	0.074-0.4	按工藝條件定	800	137

More information about second-hand ball mill, please go to http://m.daretoclean.com at any time